From the Analog Shop Floor to the Data Room

The Trade Fair NexGeM Shows the Way to Digital Transformation in Metalworking

92
The mere collection of machine data does not yet increase plant efficiency. It provides the tool that makes it possible to find out which processes create bottlenecks, which sources of error most frequently reduce machine availability, and what impact specific measures have. ©Grob-Werke

Chip-removing precision alone was yesterday. Today, intelligent algorithms and interconnected data streams determine global competitiveness in the manufacturing hall. Those who want to succeed in times of skilled labor shortages and volatile supply chains must radically transform the classic, analog shop floor into a closed and secure digital data room.

How can the leap to fully digitized manufacturing succeed when small and medium-sized enterprises still lack standards, resources, and know-how? Answers to this question are provided by the new trade fair NexGeM (Next Generation Metalworking), which, as a co-located event to the Hannover Messe, will offer insights into digital metalworking from April 5 to 8, 2027. Under the motto Metal Works Digital, NexGeM brings together exhibitors and visitors with experts from IT, digitization, and automation.

Companies that want to transform their production and build a smart factory run the risk of getting stuck in the notorious pilot project trap. Therefore, best-practice approaches are needed. 'Digitization is not an isolated project, but a long journey with many milestones,' says Prof. Jürgen Fleischer, head of the wbk Institute for Production Technology at the Karlsruhe Institute of Technology (KIT). 'It starts with management realizing that this journey cannot be avoided. Because customers are already on this path and will not wait for the slowest,' says Fleischer, who has also been president of the WGP (Scientific Society for Production Technology) since early 2026.

The Grob-Werke from Mindelheim took the leap from traditional machine builder to pioneer of the data-driven intelligent factory many years ago. ©Grob-Werke GmbH

Fleischer advises companies to define concrete steps in their digitization efforts and implement them consistently. 'Simply setting up a pilot project and seeing if it works is not enough,' says the scientist. The management must analyze the entire work process, identify bottlenecks, and systematically address them. 'And management must be aware that digitization requires a lot of effort that does not pay off immediately,' he warns.

The entire process chain must become faster

In terms of the digitization progress of factories, a 'very heterogeneous picture' emerges, says the Karlsruhe production engineer. 'Some companies are indeed still quite behind, and it is striking that the degree of digitization does not correlate with the size of the company,' he explains. Those supplying to the automotive industry are generally already doing well in terms of digitization. Here, the pressure in the industry has initiated and accelerated the digitization processes. 'Companies that are fully in global competition must be able to create and deliver an offer in the shortest time today. If a company is not fully automated, then it is too slow, and another will take the business,' says Fleischer. Furthermore, platform business will increase. 'This will make everything flat and fast,' summarizes the academic. 'The baby boomers are retiring, and the successors must manage the transition to digitization. If a company has been predominantly organized analog, it can take up to five years to achieve complete digitization.'

External specialists help get started

For this, companies need qualified personnel with high digital competence, and they must train their employees. 'If management thinks that digitization can simply run alongside day-to-day business, it will definitely not work, and digitization projects will quickly stagnate. This can be frustrating and lead to the false conclusion that digitization is inefficient and not worthwhile. But that doesn't have to be the case: experts can take an 'outside' look at the project, sometimes with very little financial effort. 'The institutes of the WGP, for example, are distributed throughout Germany and have experienced digitization specialists who can support companies on-site,' says Fleischer.

With AI, it goes faster

However, there are still too many gaps in digital processes. In everyday factory life, according to Fleischer, data is often still collected at one point, exported to Excel, copied to a USB stick, and then read in at the next point. This is very inefficient. To remain competitive in three years, traditional metalworkers must today build a range of digital core competencies. 'Work preparation, NC programming, and resource planning must run absolutely smoothly digitally, and in production, setup times and robot usage must be optimized so that the entire process chain becomes faster.'

But AI helps to significantly accelerate the digitization process. There are also large programs from the Federal Ministry of Economics that prepare the digital infrastructure – for example, with data rooms where suppliers and customers can securely exchange their data. A medium-sized company from the Allgäu has shown how digital transformation can succeed in practice: The Grob-Werke from Mindelheim took the leap from traditional machine builder to pioneer of the data-driven intelligent factory back in 2013.

It all started with the establishment of the in-house Industry 4.0 development department Grob-Net4Industry. 'The first task of the newly created team was to develop a connector that directly accesses the controls of the various machines in our production halls, regardless of manufacturer and age,' says Benedikt Gundling, product manager for digital products at Grob-Werke. Because at the beginning of digital transformation in the workshops, connectivity is always the key: older and newer systems must speak the same language.

Standardization initiatives are important

In this way, Grob-Werke was able to digitize its entire shop floor down to the level of PLC/NC variables, even without OPC-UA interfaces on the controls. In other words: the company created a way to directly capture machine data from the deepest control levels PLC (Programmable Logic Controller) and NC (Numerical Control) without relying on the modern communication protocol OPC UA (Open Platform Communications Unified Architecture) – the current standard for data exchange in industrial automation.

'Standardization communities like umati are important for the industry, but they require a correspondingly modern control system,' says Gundling, emphasizing at the same time: 'For the decades-old stock in our halls, we needed an additional way.'

The insights and products from this path will be presented by Grob-Werke at NexGeM in Hannover: "The NexGeM 2027 offers us a very good opportunity to showcase our digital solutions from Grob-Net4Industry as well as our MES system Cosera to a suitable professional audience and to demonstrate the added value they provide for modern metal processing," states Grob-Werke. "As the trade fair takes place for the first time, we are looking forward to presenting our products in a new environment, making contacts, and taking further impulses from the industry with us."

Efficiency gains of eight to fifteen percent within a year
However, the mere collection of machine data does not yet increase plant efficiency. It provides the tool that makes it possible to find out which processes create bottlenecks, which sources of error most frequently reduce machine availability, and what impact specific measures have. "From our experience, efficiency gains of eight to fifteen percent within a year are realistic in a continuously lived continuous improvement process in manufacturing," says Gundling.

Prof. Jürgen Fleischer, head of the Institute for Production Technology (wbk) at the Karlsruhe Institute of Technology (KIT). ©wbk at KIT

The connector from Grob also digitizes machines with old controls like the 840D powerline. The captured data is offered via a gateway using MQTT (Message Queuing Telemetry Transport) or OPC UA for further processing. MQTT is a lightweight network protocol for the Internet of Things (IoT) and Industry 4.0, while OPC UA is highly complex. In some cases, such as when the controls are not network-capable, Grob-Werke uses affordable IPCs from established manufacturers to digitize them. The retrofitting takes place during ongoing operations, without interfering with the plant or hall structure. "We first implemented this approach in our own manufacturing in Mindelheim before offering it to our customers," says the digitalization expert.

Cybersecurity in focus

The benefits of machine data collection quickly became clear to production managers. "However, cybersecurity is an important discussion point that we have with the IT managers of the companies," says Gundling. It is usually less about espionage and more about data sovereignty. "We secure our systems through Security by Design, align them consistently with EU regulations such as NIS-2 and the Cyber Resilience Act, and regularly subject them to penetration tests by external specialists. Depending on the value proposition of the products, we work with complete on-premises or cloud applications." In the latter case, the data is already processed by the connector at the machine, so that only defined machine data leaves the factory. "The manufacturing know-how remains in-house," emphasizes the digitalization expert.
The NexGeM will be a melting pot for the urgent aspects of digital transformation. For Grob-Werke, it is therefore clear: "We want to seize the opportunity and be part of this new trade fair from the very beginning, whose thematic focus is more current and relevant than ever."

Contact

www.nexgem.de